Paver sealing for Saint Johns homes
Paver Sealing in Saint Johns, FL
From Aberdeen to RiverTown, Saint Johns drives meet sprinklers and flatwoods sand, so call (904) 946-8454 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Saint Johns
Paver sealing is available across Saint Johns, from Durbin Crossing and Aberdeen to RiverTown and SilverLeaf. A local contractor washes, re-sands and seals drives, pool decks, lanais and walks, and the estimate is free. Use request your free estimate and a reply arrives within 1 business day, usually much sooner.
Maybe the builder's pavers on your drive have turned gray and the joints have thinned out. A gentle wash, fresh sand and a first or second coat can bring the color back to one even tone. Call (904) 946-8454 and say when the home was built, which helps the contractor guess what is already on the surface.
Why hire a local paver sealing contractor in Saint Johns?
Saint Johns has grown fast, so many homeowners face a first reseal without knowing what is on the pavers already. A local contractor can look and tell you, so request your free estimate.
A free look at what is there
The contractor checks what is on your pavers now, since the old sealer decides what can go on next. The estimate is free.
What companies charge per foot
Posted prices in Northeast Florida run from $1.75 to $3.25 per square foot to clean, sand and seal. Compare any Saint Johns bid with it.
Gentle cleaning first
A trade supplier warns that going past 3,000 PSI can strip standard concrete pavers. Ask how hard the wash will be.
You stay in charge
You pick the date, the finish and whether to go ahead. A Saint Johns estimate carries no obligation.
Get Your Free Estimate in Saint Johns
Tell us about your pavers in Saint Johns.
Free, no obligation
What paver problems show up most in Saint Johns?
Cleaning pressure that strips the surface
A trade supplier's guide says going past 3,000 PSI on standard concrete pavers risks stripping the surface. Saint Johns homes are newer, with a median build year of 2009, so most drives are young enough to still hold their surface. Harsh cleaning can spend that surface early. Ask the contractor how the cleaning is done, which means you know the pavers come through intact. A quick description of the method on the quote is a fair request.
Flatwoods ground that drains slowly
The Julington-Durbin Preserve in this area has sandhill on higher ground, flatwoods at lower levels and floodplain marsh along the creeks. USDA describes the Myakka soil of Florida flatwoods as poorly drained sand with a water table within 18 inches of the surface for one to four months in most years. Lots on lower ground dry slowly after a storm. Sealer needs a dry surface, which means the low side of the drive is checked first. Preserve edges and creek-side lots are the places to mention first.
Builder pavers at their first reseal
The Census Bureau's survey for ZIP 32259 puts the median home build year at 2009. That suggests many Saint Johns pavers are 15 years old or more. Some may have been left bare, some may carry a thin builder coat, and a past owner may have added another. The contractor has to find out which, because water-based sealer cannot go over solvent-based sealer. Ask when the drive was laid and whether anyone has sealed it since, which helps rule out a surprise coat.
Rust marks where the sprinklers reach
UF/IFAS says most Florida well water is high in iron and that orange stains often appear when it is used for irrigation. If your spray heads reach the pavers, the marks line up where the water lands. Watering days in St. Johns County are set by address in some areas, so the same spots get hit on the same days. Rust gets treated before sealing, because sealer would lock it in. A short drive with two spray heads can show three or four marks.
Short drives and small patios
At The Landings in RiverTown, Mattamy Homes opened homesites 60 feet wide. A narrower lot means a shorter drive and a smaller lanai. A Southside paver page says small patios can run into company minimum job sizes. Ask about the minimum when you call, which means a small job does not turn into a surprise on the quote. Combining a drive, walk and lanai in one visit usually gives a small job more weight.
Which Saint Johns communities are newest, and does that change a paver job?
Yes, because age sets how many coats your pavers have had. Durbin Crossing broke ground in 2005 on timber land bought from Rayonier, with builders including Beazer, Ryland and Toll Brothers. Aberdeen is a 1,316-acre community off Race Track Road, and both have had years of sun and sprinklers since. Older drives there may be ready for a second or third coat, so request your free estimate.
RiverTown, off State Road 13, is the only master-planned community on the St. Johns River in the county, and Mattamy Homes opened The Landings there in 2017. SilverLeaf is planned for up to 10,700 homes on about 8,500 acres between CR 210 and CR 16A. A drive built in the last few years may be nearing its first coat. Call (904) 946-8454 and name your community.
Beachwalk sits about a mile east of I-95 off County Road 210, with a 14-acre Crystal Lagoon and nearly 800 homes planned at build-out. The Cimarrone Golf Club neighborhood lies south of CR 210. If your HOA sets finish rules, Florida Statute 720.3035 lets it review changes to the extent its guidelines say so. Check your rules, then request your free estimate.
What does paver sealing cost in Saint Johns?
Expect a published figure of $1.75 to $3.25 per square foot, which is what Northeast Florida companies commonly post for clean, sand and seal. A home with bare or lightly sealed pavers is simpler than one with a failed coat, since stripping adds cost. Lanais and tight courtyards can raise the rate per square foot because setup stays the same. To get a number, request your free estimate, and the estimate is free.
Small patios can run into a company's minimum job size, according to a Southside paver page. Bundling a drive, walk and lanai often helps. Ask the bid to list each surface and name the sealer. Call (904) 946-8454 and ask what applies at your address.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in Saint Johns?
Find out what is on the surface
Builder pavers may be bare or carry a thin first coat, and a past owner may have added another. The contractor identifies the old product, since water-based sealer cannot go over solvent-based sealer. Sunken or lifted sections are reset first. Ask for the sealer brand on the quote. Photos of the garage apron and the lanai help if you are at work.
Clean with care
Cleaning should match the surface. A trade supplier says going past 3,000 PSI on standard concrete pavers risks stripping them. Rust from iron-heavy irrigation water and green film near preserve edges each get their own treatment. The goal is clean pavers with the surface intact. You are told in advance which method is planned, which means no surprises on the day.
Refill the joints
Sand goes back in before sealing, never after. A paver company in the St. Augustine area says many local installs used play sand that storms and sprinklers wash out, leaving gaps that fill with dirt and weeds. Full joints keep pavers locked in place and slow the weeds.
Wait through the wet spots
Sealer needs a dry surface. Flatwoods ground drains slowly, and summer storms come in brief, heavy bursts. The contractor checks the low side of the lot and not only the sunny middle. Newly laid pavers wait about 60 to 90 days before the first coat. If an afternoon storm moves in, the date moves with it.
Spray, back-roll and keep cars off
A trade supplier recommends spraying the first coat and then back-rolling with a slit foam roller to pull extra product out of the joints. A paver company near the county seat says cars can return to a fresh coat in 24 to 72 hours. Ask the contractor for the wait that fits the product and the weather. A short walk through the finished surface with you is a fair ask.
Complete paver services in Saint Johns
A Saint Johns job follows a set order. The contractor identifies the old coat, washes at a safe pressure, refills the joints, waits for dry pavers and seals. Skipping a step usually shows up in the finish, and a fresh coat can only be as good as the surface under it. For timing on your lot, call (904) 946-8454.
Saint Johns surfaces include builder driveways, lanais, pool decks and front walks. Many were laid in the same years, so they wear alike but not equally, since shade, sprinklers and traffic differ. Tell the contractor which surfaces you have when you request your free estimate.
Film-forming sealers sit on the surface and bind joint sand, while penetrating sealers soak in and leave the look unchanged. A wet look deepens color, and matte keeps it natural. One St. Johns County company offers both water-based and solvent-based products. Call (904) 946-8454 to talk through which suits your pavers.
Rain comes in short, heavy bursts, mostly from May to September, so a sealing day needs a dry window. Watering days can differ by address, and the sprinklers should be off the pavers on job day. Fall and winter are the drier months in Jacksonville, from November to April. To pick a date that works, request your free estimate.
Questions to ask before you hire
- Do you price the driveway, the walkway and the pool deck separately?
- Can you show me photos of a finished job that looks like mine?
- Can you lift the tire marks off my driveway before you seal it?
- How do you keep the wash water out of the storm drain at the curb?
- How long before my dog can walk on the pavers again?
- How do you handle weeds and grass growing up through the joints?
- Will the sealer even out the color where a few pavers were replaced?
What do sealed pavers look like around Saint Johns?
Why local matters in Saint Johns
A contractor who works in Saint Johns knows how the area is laid out. State Road 13 follows the river, Race Track Road feeds Durbin Crossing and Aberdeen, and CR 210 runs toward SilverLeaf and Beachwalk. That knowledge helps a crew plan the day and the route between jobs. To reach a local contractor, call (904) 946-8454.
Local also means knowing the watering rules. St. Johns County assigns reclaimed water watering days and times by address, starting in SilverLeaf with Silver Landing. A contractor who knows your schedule can avoid a sealing day that lands on a watering day. You can request your free estimate and mention your address.
It also means knowing the ground. The Julington-Durbin Preserve has sandhill on higher ground, flatwoods lower down and marsh along the creeks. Lots near those creeks can drain slowly after a storm. Call (904) 946-8454 and say whether your lot sits near a creek or a preserve.
How does a contractor find my Saint Johns home with so many communities?
Start with the main roads. State Road 13 is the William Bartram Scenic and Historic Highway along the river, and Race Track Road runs east of it past Julington Creek Plantation. Alpine Groves Park, 54.5 acres between the river and the highway, has a farmhouse on a former orange plantation. If you live near either, request your free estimate and name the road.
Schools help too. Creekside High and Bartram Trail High serve the area, along with Durbin Creek, Hickory Creek and Cunningham Creek elementary schools. The Pavilion at Durbin Park was the first center to open at Durbin Park, off Race Track Road. Mention any of them when you call (904) 946-8454.
Frequently Asked Questions
Why is paver sealing so expensive in Saint Johns?
Most of the price is prep. According to 904 Paver Sealing, crews put about 2 to 3 hours of prep behind each hour of sealing. Published rates run $1.75 to $3.25 per square foot to clean, sand and seal, and stripping a failed coat adds to that. A small lanai or short drive can cost more per square foot, since setup is the same on a smaller area.
Which water-based sealer should I ask about in Saint Johns?
Have the sealer brand named on the quote before you agree. One St. Johns County company offers both water-based and solvent-based sealants. Water-based cannot go over solvent-based, so the old coat decides what can follow.
How long does paver sealing last in Saint Johns?
The span companies quote is two to five years per coat. Full sun, tires and sprinkler spray push a drive toward the shorter end. A Jacksonville company says a paver that darkens as water soaks in is due for a new coat. Your shade, sprinklers and daily tires decide where you land inside that span.
How do professionals sand and seal pavers in Saint Johns?
They work in a set order. The surface is washed, the joints are refilled with sand, the pavers dry, and the sealer is sprayed and back-rolled. Sand goes in before sealing, never after. Each stage depends on the one before it, which is why rushing the early steps shows up in the last coat.
Will a pressure washer damage my Saint Johns pavers?
It can. A trade supplier says going past 3,000 PSI on standard concrete pavers risks stripping the surface. A contractor who cleans pavers regularly matches the pressure to the surface. Ask which method the contractor plans to use, and ask for it in writing on the quote.
Can the builder's sealer on my Saint Johns pavers be sealed over?
Sometimes. A water-based sealer cannot go over a solvent-based one, so the contractor has to identify the old product first. Failed or flaking sealer is stripped before new sealer goes on. Keep any receipts or product names from the builder or a past owner, since they can settle the question quickly.
Do water restrictions affect paver cleaning in Saint Johns?
They can. The St. Johns River Water Management District says street and pressure washing activities face additional restrictions in a Phase III shortage, and the county reported one on May 11, 2026. Ask the contractor which rules cover your job date.
How soon can new pavers in Saint Johns be sealed?
The usual wait is about 60 to 90 days from the day they are laid, per a company in the St. Augustine area. The wait lets trapped moisture escape and lets white haze show up so it can be treated first. A newly laid driveway in a place like Durbin Crossing or SilverLeaf may be ready sooner or later depending on its install date.
Does my Saint Johns HOA need to approve a new sealer?
It depends on your rules. Florida law, in Statute 720.3035, lets an association review how changes look within the limits of its declaration or guidelines. A color-changing finish is the likelier question.
Does sealing help with rust stains from sprinklers in Saint Johns?
Not by itself. Rust has to be treated before sealing, because sealer would trap the stain underneath. Sealing can make new marks easier to rinse off, and turning spray heads away from the pavers helps keep them from forming.
Do I need to be home for the estimate on my Saint Johns pavers?
Not always. One Jacksonville company notes that its estimates are free and the owner can be away. Photos of the drive, walk and lanai help the contractor see what you want sealed.
Will sealing change the color of my Saint Johns pavers?
It can. A film sealer comes in matte, satin or wet look, and a wet look deepens color. A penetrating sealer leaves the look almost unchanged, so ask which finish goes on your surface.
Ready for a Free Estimate in Saint Johns?
Call (904) 946-8454 and tell us about your pavers.
Free, no obligation